Dimmer switch - Solid Brushed Brass 1-4 Gang

Solid Brushed Brass Multi-Way Dimmer Switch (1–4 Gang)

Dimmer switch - Solid Brushed Brass 1-4 Gang

250W / 1 Gang / Brass

£59.00

What makes it feel premium?

Craft defines detail.

Crafted with meticulous attention to every cut, polish and brush stroke, each piece is designed to bring lasting beauty to the spaces you live in every day.

Solid Brushed Brass Finish

This dimmer switch is made from solid brass with a finely brushed finish. Its classic design blends seamlessly into both traditional and modern interior styles.

Knurled Brass Rotary Knobs

Heavy-duty, genuine brass knurled knobs. The familiar feel of a rotary knob, powered by intelligent control — for effortlessly smooth, fluid dimming.

Engineered for Smooth, Silent Dimming

Employing a high-speed dimming chip and precisely calibrated MOSFETs, it maintains perfect brightness stability.

No Neutral Wire Required

Designed for straightforward retrofit installation using existing home wiring in the UK.

Wide Lighting Compatibility

Uses trailing-edge dimming technology for broader lamp compatibility,

2-way control

Used with astandard light switch, allowing you to control the same light from two locations — switch it on at the door, then adjust the brightness from your bedside.

Technical Specifications

Input 220–240V AC, 50Hz

Faceplate Solid brushed brass

Faceplate size 1-gang:86*86mm 2-gang:86*86mm 3-gang:86*146mm 4-gang:86*146mm

Load type Halogen, Incandescent, Dimmable LED, Dimmable CFL Wattage: 5-250W

Grid compatibility MK, BG, DETA, Hager, Hamilton, Crabtree, Schneider, Schneider-lisse, Wandsworth

Wall box depth ≥25mm

Wiring No neutral required

Module Material PC (recycled plastic)

Dimming method Trailing edge & leading edge

2-way or multiway Yes (need to work with a 2-way intermediate switch)

Frequently Asked Questions

Can I choose between leading edge and trailing edge dimming?

Yes – both options are supported. Trailing edge (default) is recommended for most LEDs, while leading edge may be better for some halogens or older LED bulbs.

Can I adjust the brightness range for my bulbs?

Yes – you can set custom minimum and maximum brightness levels to avoid flicker and tailor dimming to your bulbs.

What type of bulbs are supported?

The dimmers are designed for high-quality dimmable LED bulbs or halogen lamps. Minimum load is 5W per lamp, with a total minimum of 5W per circuit.

Do I need a neutral wire?

No – Repenic are designed for UK homes and work without a neutral wire. This means they can be installed as a direct replacement for your existing wall switch in older properties as well as modern homes.

What should the depth of the installation box be?

It should be at least 25mm.

Can I install more than one 2-way dimmer in the same circuit?

In one circuit, there can only be one 2-way dimmer. If you want to control it from different locations, please connect it to 2-way or intermediate switches.

If you want to install multiple dimmers in the same circuit, please use our multi-way dimmers.

Do I need to regularly maintain my brass faceplate?

No need. Our brass plates have a protective coating on the surface that effectively prevents oxidation and fading, so almost no special daily care is required.

How many lights can I connect to a dimmer?

There is no limit on the number of lights controlled by the dimmer. As long as the total wattage of all lights controlled by this dimmer adds up to less than 250W. Due to certain errors in the nominal wattage of lights, we recommend that the total wattage of the lights be preferably below 230W.

Can it be installed in a bathroom?

Yes, but only if it meets the required safety standards and is placed in the right zone.

Click here to get more details.