Dimmer switch - Matt Black 1-4 Gang

Matt Black Multi-Way Dimmer Switch (1–4 Gang)

Dimmer switch - Matt Black 1-4 Gang

250W / 1 Gang / Black

£59.00

Designed to Belong

Crafted from a solid steel faceplate and paired with a precision-knurled knob, it brings lasting quality and timeless architectural character to any space.

Engineered for Smooth, Silent Dimming

Powered by a high-speed dimming chipset and precision-tuned MOSFETs, it delivers smooth, silent and flicker-free dimming from 0–100%.

No neutral wire required

Retrofits cleanly into existing UK wiring — no neutral wire, no structural changes, no disruption to your home.

Fits standard UK 25mm back boxes

Compatible with standard 25mm UK back boxes for easy installation

Wide Lighting Compatibility

Compatible with dimmable LED, halogen, incandescent and dimmable CFL bulbs, supporting loads from 5–250W.

6-Layer Safety

Exceeds UKCA requirements; features a V-0 rated flame-retardant base with comprehensive surge and overload protection.

2-way control

Used with astandard light switch, allowing you to control the same light from two locations — switch it on at the door, then adjust the brightness from your bedside.

Technical Specifications

Input 220–240V AC, 50Hz

Faceplate Solid Stainless Steel

Faceplate size 1-gang:86*86mm 2-gang:86*86mm 3-gang:86*146mm 4-gang:86*146mm

Load type Halogen, Incandescent, Dimmable LED, Dimmable CFL Wattage: 5-250W

Grid compatibility MK, BG, DETA, Hager, Hamilton, Crabtree, Schneider, Schneider-lisse, Wandsworth

Wall box depth ≥25mm

Wiring No neutral required

Module Material PC (recycled plastic)

Dimming method Trailing edge & leading edge

2-way or multiway Yes (need to work with a 2-way intermediate switch)

Frequently Asked Questions

Will the Repenic dimmer work with my smart home system?

Yes it work with Zigbee and work with Home Assistant (ZHA), Zigbee2MQTT, SmartThings, Hubitat, Philips Hue* and more. They also support voice control through Alexa or Google Assistant when connected via a compatible hub.

Can I choose between leading edge and trailing edge dimming?

Yes – both options are supported. Trailing edge (default) is recommended for most LEDs, while leading edge may be better for some halogens or older LED bulbs.

Can I adjust the brightness range for my bulbs?

Yes – you can set custom minimum and maximum brightness levels to avoid flicker and tailor dimming to your bulbs.

What type of bulbs are supported?

The dimmers are designed for high-quality dimmable LED bulbs or halogen lamps. Minimum load is 5W per lamp, with a total minimum of 5W per circuit.

Do I need a neutral wire?

No – Repenic are designed for UK homes and work without a neutral wire. This means they can be installed as a direct replacement for your existing wall switch in older properties as well as modern homes.

What should the depth of the installation box be?

It should be at least 25mm.

Does it support 2-way or 3-way control?

In one circuit, there can only be one smart dimmer, and it can not be wired to a 2-way switch or intermediate switches. If you want to control it with a 2-way or 3-way method, please use our multi-way dimmers.

Do I need to regularly my steel faceplate?

No need. Our plates have a protective coating on the surface that effectively prevents oxidation and fading, so almost no special daily care is required.

How many lights can I connect to a dimmer?

There is no limit on the number of lights controlled by the dimmer. As long as the total wattage of all lights controlled by this dimmer adds up to less than 250W. Due to certain errors in the nominal wattage of lights, we recommend that the total wattage of the lights be preferably below 230W.

Can it be installed in a bathroom?

Yes, but only if it meets the required safety standards and is placed in the right zone.

Click here to get more details.